Table of Contents
Advertisement
12. Connect the fan cable in a memory slot cover, and seat the memory
slot cover.
13. Screw under the battery pack slot with the one screw.
14. Install the battery pack.
Removing the internal modem
To remove the internal modem.
1. Save your data, quit Windows and turn off the power.
2. Disconnect the AC Adaptor and any other peripheral devices.
3. Close the display panel and turn the computer over. Remove the
Battery Pack.
4. Remove one screw under the battery pack slot.
5. Remove the memory slot cover and remove the fan cable.
6. Remove the cover of a hard disk drive slot.
7. Remove nine screws of the base cover of the computer, and remove
the base cover.
The standard (PTT) label can be checked.
8. Remove the two screws which are fixing the modem.
9. Disconnect the modem cable from the modem board.
10. Seat the base cover and secure it with nine screws.
11. Seat the cover of a hard disk drive slot.
12. Connect the fan cable in a memory slot cover, and seat the memory
slot cover.
13. Screw under the battery pack slot with the one screw.
14. Install the battery pack.
The internal modem is approved by Japan Approvals Institute for
Telecommunications Equipment.
Portégé M200
Internal Modem Guide
G 2
Advertisement
Table of Contents
