Connecting; Disconnecting - Toshiba Portégé M200 User Manual

Connecting

To connect the internal modem cable, follow the steps below.
The modular cable that comes with the computer must be used to
connect a modem. Connect the end of the modular cable with the core to
the computer.
In case of a lightning storm, unplug the modem cable from the telephone
jack.
Do not connect the modem to a digital telephone line. A digital line will
damage the modem.
1. Plug one end of the modular cable into the modem jack.
2. Plug the other end of the modular cable into a telephone jack.
Do not pull on the cable or move the computer while the cable is
connected.
If you use a storage device such as a CD ROM drive or HDD connected to
a 16 bit PC card, you might experience the following modem problems:
3. Modem speed is slow or communication is interrupted.
4. Skip may occur in sound.

Disconnecting

To disconnect the internal modem cable, follow the steps below:
1. Pinch the lever on the connector in the telephone jack and pull out the
connector.
2. Disconnect the cable from the computer in the same manner.
Portégé M200
MODEM JACK
Connecting the internal modem
Operating Basics
4 27