Table of Contents
Advertisement
Turning on the power
This section describes how to turn on the power.
NOTE: After you turn on the power for the first time, do not turn it off
until you have set up the operating system.
1. Open the display.
2. Press and hold the computer's power button for two or three seconds.
Windows XP/2000 setup
When you first turn on the power, the computer's initial screen is the Microsoft
Windows XP Professional or Windows 2000 Startup Screen Logo.
Follow the on-screen directions.
Turning off the power
The power can be turned off in one of the following modes: Shut down (Boot),
Hibernation or Standby mode.
Shut Down mode (Boot mode)
When you turn off the power in Shut Down mode no data is saved and the
computer will boot to the operating system's main screen.
1. If you have entered data, save it to the hard disk or to a diskette.
Figure 3-5 Turning on the power
Get other manuals https://www.bkmanuals.com
Turning on the power
3-7
Advertisement
Table of Contents
