Table of Contents
Advertisement
OIT***-F113-B12-CB*
Appendix
11
Appendix
11.1
Structure of the OITCamera.XML file
All network addresses for all desired OIT systems can be stored in the
OITCamera XML file. This makes it easier to select individual OIT systems, since
a selection of OIT systems is already displayed when making a connection
request to OITControl.
Structure of the XML file:
The subfolder Cameras is in OITCamera. Do not change this file name. Any
number of OIT systems with their IP addresses can now be added to the subfolder
Cameras.
Adding a new OIT system
1. Copy one of the two already-existing folders.
2. Write the IP address of the new OIT system in the copied folder.
3. Set the IP port to the value at which the OIT system was configured. (default:
10050)
4. Any OIT system name can be entered under CameraName.
5. The location of the camera can be entered for CameraLocation.
file can be saved and loaded to OITControl.
76
If several cameras are to be entered, repeat steps 1 - 5. Otherwise, the
Advertisement
Table of Contents
