Process Oitcontrol Menu > Manual Entry - Pepperl+Fuchs OIT F113-B12-CB Series Manual

OIT***-F113-B12-CB*
OITControl menu structure
9.2.1 Process OITControl menu > Manual entry
Figure 9.7
The Manual entry dialog box consists of three input boxes:
■
■
■
The input boxes can still be defined under Configuration > Configure
OITControl > Manual entry. There an optional preliminary check of the entered
number(s) can be set before they are sent to the OIT system. see chapter 9.4.3.3
54
OITControl Manual data input
Left input box: the ID number of the read-only tag is manually entered
here.
Center input box: the check digit of the read-only tag is manually entered
here.
Right input box: The UID code is entered here. For example: a defective
read-only tag is replaced by a new read-only tag that merges with the UID
number to create a unique identification code.