Interfaces And Connections - Pepperl+Fuchs OIT F113-B12-CB Series Manual

OIT***-F113-B12-CB*
Product Description
4.4

Interfaces and Connections

The device includes the following connections:
1
Figure 4.3
1 Grounding screw
2 Power supply (Harting HAN Q 8/0 F plug)
3 Network (RJ45 network socket with push pull connector for IP65)
4 Trigger sensor (4-pin M12 socket)
5 External illumination (4 in M12 socket)
1
Figure 4.4
1 Grounding screw
2 Trigger sensor (4-pin M12 socket)
3 Network (RJ45 network socket with push pull connector for IP65)
4 Power supply (Harting HAN Q 8/0 F plug)
Connection for the external illumination unit
There is a 4-pin M12 socket on the side of the OIT system housing (not on the
OIT200 system) for connecting the external illumination. The following diagram
shows the pin assignment:
Figure 4.5
1 24 V illumination power supply
2 External laser control (LAS)
3 Ground (GND)
4 External illumination control (BEL)
4
5
2 3
Device connections on the OIT300, OIT500 and OIT 1500 systems
4
2 3
Device connection on the OIT200 system
1
4 2
3
External illumination pin assignments
11