Table of Contents
Advertisement
OIT***-F113-B12-CB*
OITControl menu structure
9.1.1
OITControl file menu > Configuration
Figure 9.3
■
■
9.1.2
ITControl file menu > Connect to OIT system
Figure 9.4
■
■
52
Menu bar OITControl File > Configuration
Open configuration: Using an XML configuration file, you can adapt the
appearance of the OITControl to the requirements of your plant. These
configuration files can be opened in this menu.
Launch OIT system: Various IP Configuration files can be created and
opened in this menu. Different OIT systems with their different IP addresses
can be stored in one configuration file. When cueing the function Connect
to the OIT system all available IP addresses for selection will be
displayed.
Select OIT system... dialog box.
left input area: Either the IP address last used or the IP address of the OIT
system can be manually entered using the drop-down list in the left input
area. More OIT systems can be added to the drop-down list (by changing
the file OITCamera.XML see chapter 11.1). If another connection to an OIT
system is established, during the next program start-up, the most recently-
used connection will be offered by default in the drop-down list (last
used/last used).
right input area: The port number may be entered in the right input area.
Advertisement
Table of Contents
