Table of Contents
Advertisement
OIT***-F113-B12-CB*
Product Description
4.3
Displays and controls
The illumination unit contains 7 LED indicators that give information on the status
of the OIT system.
Figure 4.2
1
2
3
4
5
6
7
10
1
2
3
4
5
6
7
Illuminatiion unit of the OIT system
Code OK (Code OK)
Code read successful; flashes approximately 5 seconds for successful programming.
Error
Lights red when a read error occurs.
Trigger
Lights yellow when a trigger sensor is connected.
Stability of image information
Lights red even if the image taken is recognizable. However, when ambient conditions
worsen (camera image too bright/dark, too many structures in the image, object almost
too far/too near, low contour, object just barely in image area), a read error can be ex-
pected.
Ready
Flashes while initializing approximately 30 seconds. During this time a Data Matrix code
can be read in to (re)program the unit. No network connection to the OIT system can be
established in the first 30 seconds. The LED lights up once the system is ready for oper-
ation.
Power
Lights green when power is supplied to the OIT system.
Infrared-illumination control
Lights up red when the infrared illumination is active
Advertisement
Table of Contents
