Panel Power On/Off; System Auto Off; Auto Power On; Ring Indicator Power On - Toshiba Portege 7200CTe User Manual

Panel power on/off

You can set up your computer so that power turns on automatically when
you open the display panel and turns off when you close it.
Refer to Chapter 7,
how to enable this convenient feature.
If you have enabled the Panel power on/off function, and you use the
Suspend or Standby button in the Windows Shut Down menu to turn off
the computer, do not close the panel until the suspend function is
completed. If you close the panel before the suspend function is
completed, Resume (Suspend or Standby) mode will not work.

System Auto Off

This feature turns the system off automatically if it is not used for a set duration.
Refer to Chapter 7,
how to set the duration.

Auto Power On

This feature lets you set a time and date for the system to turn
on automatically.
Refer to Chapter 7,
how to set the power on timing.

Ring indicator power on

This feature lets the computer's power be turned on automatically when a
call comes in from a remote modem. When a modem receives a signal
from a remote modem, it sends a ring indicator power on call to the
computer. This feature does not work with a PC Card modem under
Windows 95/2000. It does not work at all with Windows NT.
Refer to Chapter 7,
how to enable ring indicator power on.
6-14 Power and Power-Up Modes
Setup and Password
Setup and Password
Setup and Password
Setup and Password
Security, for an explanation of
Security, for an explanation of
Security, for an explanation of
Security, for an explanation of
User's Manual