Electrical Connection - Miele EVS 7110 Operating And Installation Instructions

Installation

Electrical connection

We recommend that you connect the
drawer to the mains electricity via a
suitable switched electrical socket. This
simplifies servicing. The socket and on-
off switch should be easily accessible
after the drawer has been installed.

Danger of injury due to
unauthorised installation,
maintenance and repairs.
Danger of injury! Miele cannot be
held liable for unauthorised
installation, maintenance and repair
work as this can be dangerous to
users.
Miele cannot be held liable for
damage or injury (e.g. electric shock)
caused by the lack of or inadequacy
of an on-site earthing system.
If the plug is removed from the
connection cable or if the cable is
supplied without a plug, the drawer
must be connected to the electricity
supply by a suitably qualified and
competent electrician.
If the socket is no longer accessible,
or if a hard-wired connection is
planned, an additional means of
disconnection must be provided for
all poles. Suitable means of
disconnection include switches with
an all-pole contact gap of at least
3 mm. These include miniature circuit
breakers, fuses and relays. The
connection data is given on the data
plate. Please ensure this information
matches the household mains
electricity supply.
After installation, ensure that all
electrical components are shielded
and cannot be accessed by users.
52
Total power output
See data plate.
Connection data
The connection data is given on the
data plate. Please ensure this
information matches the household
mains supply.
Residual current device
For extra safety, it is advisable to
protect the drawer with a suitable
residual current device (RCD) with a trip
range of 30 mA.