Advertisement
Installation
Electrical connection
Risk of damage from incorrect
connection.
Incorrect installation, maintenance
and repairs can be dangerous to
users.
Miele cannot be held liable for
damage or injury (e.g. electric shock)
caused by unauthorised installation,
maintenance or repair work, or by an
inadequate or faulty on-site earthing
system.
This SmartLine appliance must be
connected to the electricity supply
by a qualified electrician.
The electrician must be familiar with
and comply with the national
regulations and any additional
regulations of the local electricity
provider.
After installation, ensure that all
electrical components are shielded
and cannot be accessed by users.
10878121-02
Total power output
See data plate.
Connection data
The connection data is given on the
data plate. Please ensure this
information matches the household
mains supply.
Residual current device
For extra safety, it is advisable to
protect the SmartLine appliance with a
suitable residual current device (RCD)
with a trip range of 30 mA.
Disconnecting devices
It must be possible to disconnect the
SmartLine appliance from the mains at
all poles using disconnecting devices. A
contact distance of at least 3 mm must
be observed in the switched-off state.
The disconnecting devices are
overcurrent protection devices and
residual current protection devices.
Advertisement
