Installation - Miele EVS 7110 Operating And Installation Instructions

Installation

The drawer has an integrated
vacuum pump which contains oil.
To prevent oil from leaking out, the
drawer must be transported and
stored in a horizontal position only.
Do not tilt the drawer and do not
stand it up on its edge.
Preparing the drawer
For safe transportation, the vacuum
pump is provided with a transit device
which must be removed before
installation. The air filter supplied must
be fitted in place of the transit device.
There are also 2 safety screws on the
back of the drawer to prevent the
drawer from being opened
unintentionally during transportation
and when it is being removed from the
packaging.
Fit the air filter before building in the
drawer and remove the safety
screws at the back.
Otherwise the drawer cannot be
operated and has to be taken out of
the housing unit.
Keep the transit device and safety
screws for any future transportation.
The transit device can be secured to
the back of the drawer.
Fitting the air filter and removing the
safety screws
 Slide the cover to the right and
remove it.
 Pull the red transit device  out, e.g.
with universal pliers.
Installation
47