Operation
After use
Touch the sensor to switch the
drawer off.
Clean and dry the drawer and any
accessories as described in
"Cleaning and care".
Do not close the glass lid until the
vacuum chamber is completely dry.
Close the drawer.
The last vacuum and sealing level
selected is automatically activated the
next time the drawer is switched on,
and this is shown in the control panel.
28
Cancelling a vacuuming
process
You can cancel a vacuuming process
at any time, e.g. if you notice during the
process that the edge of the bag is not
positioned correctly or that the closure
on the container lid is not pointing to
"seal" (closed).
Please note that when vacuuming
bags, if the vacuuming process is
cancelled, the bag will not be sealed.
Touch the sensor.
The vacuuming process stops.