Table of Contents
Advertisement
Electrical connection
Risk of damage from incorrect
connection.
Unauthorised installation,
maintenance and repairs can cause
considerable danger for the user.
Miele cannot be held liable for
damage or injury caused by
unauthorised installation,
maintenance or repair work, or by an
inadequate or faulty on-site earthing
system (e.g. electric shock).
This SmartLine element must be
connected to the electrical supply by
a qualified electrician.
The electrician must be familiar with
and comply with the national
regulations and any additional
regulations of the local electricity
provider.
After installation, ensure that all
electrical components are shielded
and cannot be accessed by users.
Total power rating
See data plate
Connection data
The connection data is quoted on the
data plate. Please ensure these match
the household mains supply.
Disconnecting devices
It must be possible to disconnect the
SmartLine element from the mains at all
poles using disconnecting devices! A
contact distance of at least 3 mm must
be observed in the switched-off state!
The disconnecting devices are
overcurrent protection devices and
residual current protection devices.
Installation
71
Advertisement
Table of Contents
