Table of Contents
Advertisement
NE-4000T Series User's Manual
Overview
The NE-4000T modules measure just 44 × 31.48 mm, or less than half the size of a typical credit
card, making NE-4000T small enough to fit inside most serial devices. NE-4000T comes with the
TCP/IP stack built into the firmware, making the task of integrating NE-4000T module with your
serial devices efficient and straightforward. Engineers will not need to spend a lot of time on
TCP/IP programming, but instead can focus on developing other major features, shortening the
time to market of your new products.
The reliable TCP/IP communication firmware that comes with the NE-4000T Series can be
configured very easily with the user-friendly Windows utility or by serial console. The product
also has a Web console for basic configuration by web browser. In addition, a Windows-based
NECI (Network Enabler Configuration Interface) Library is available to help you develop your
own Windows utilities.
An integration kit (NE-4000T-ST) containing a development board, documents, sample code,
cables, and accessories is available for testing and product development.
Package Checklist
1 NE-4000T
1 NE-4000T-ST
NE-4000T Documentation & Software CD
NE-4000T Quick Installation Guide
Universal Power Adaptor Set
Null modem cable
Product Warranty Booklet
NOTE: Notify your sales representative if any of the above items is missing or damaged.
Product Features
NE-4000T has the following features:
TTL Interface (up to 115.2 Kbps)
10M Ethernet with built-in transformer
Ready-to-use TCP/IP firmware
Compact size
Dual-in-line pin headers
Low power consumption
Web-based Administrator utility
Menu-driven serial console utility
Accessible by browser
NECI Library for developing your own configuration utility
Highly expandable with up to 8 DIOs (GPIOs)
1-2
Introduction
Advertisement
Table of Contents
