AirWorks AWK-5222 User's Manual
Overview
The AWK-5222 Access Point/Bridge and AP Client is ideal for applications that need a more
reliable solution, and are hard to wire, too expensive to wire, or use mobile equipment that
connects to a TCP/IP network. The AWK-5222 can operate at temperatures ranging from 0 to
60°C for standard models and -40 to 75°C for extended temperature models, and is rugged enough
for any harsh industrial environment. Installation is easy, with either DIN-Rail mounting or wall
mounting in distribution boxes. The DIN-rail/wall mounting ability, wide operating temperature
range, and IP30 housing with LED indicators make the AWK-5222 a convenient yet reliable
solution for any industrial wireless application.
Package Checklist
Moxa's AWK-5222 is shipped with the following items. If any of these items is missing or
damaged, please contact your customer service representative for assistance.
1 AWK-5222
2 Swivel-type Antennas (2dBi, RP-SMA, 2.4&5GHz)
1 Quick Installation Guide
1 Software CD
1 Moxa Product Warranty Booklet
1 Cable Holder with a Screw
2 Protective Caps
NOTE
The above items come with the AWK-5222 standard version. The package contents may vary in
different a customized version.
Product Features
IEEE802.11a/b/g Compliant
Three-in-one design (AP/Bridge/Client)
Dual-RF design for redundant wireless communication
Advanced Wireless Security:
64-bit and 128-bit WEP/WPA/WPA2
SSID Hiding/IEEE 802.1X/RADIUS
Packet access control & filtering
STP/RSTP support for redundancy of system networking
Long-distance transmission support
Turbo Roaming
Dedicated antenna selection
Free firmware update for more advanced functions
RS-232 console management
2DI+1DO for on-site monitoring and warming
TM
enables rapid handover (Client mode)
1-2
Introduction