Operating Mode - Moxa Technologies NE-4000T Series User Manual

NE-4000T Series User's Manual
Stop Bits
Setting
1
Flow Control
Setting
None, RTS/CTS, XON/XOFF
FIFO
Setting
Disable
Interface
Setting
TTL
ATTENTION
Check the serial communication parameters in your Serial Device's user's manual, and then
configure NE-4000T's serial parameters with the same communication parameters used by your
serial devices.

Operating Mode

Since the configuration variables depend on the Operating Mode, we discuss each NE-4000T
model separately.
Real Com Mode
Check the Modify box, select the NE-4000T-RC you would like to configure, and then click on
the Settings button in the lower right corner of the window.
Network Enabler Administrator
Factory Default
1
Factory Default
None
Factory Default
Disable
Factory Default
TTL
4-16
Necessity
N/A
Necessity
N/A
Necessity
N/A
Necessity
N/A