Advertisement
Installing the Washer-Fluid Tank
For Machine without the Storage Box Kit Installed
1. Install the washer-fluid tank to the washer-fluid-tank
bracket with the 4 carriage bolts (5/16 x 3/4 inch) and
4 flange nuts (5/16 inch) as shown in
1. Flange nut (5/16 inch)
2. Washer-fluid tank
2. Torque the flange nuts (5/16 inch) to 1,987 to 2,542
N∙cm (175 to 225 in-lb).
3. Install the washer-fluid-tank bracket to the dash
reinforcement with the 2 flange-head screws (1/4 x 5/8
inch) and 2 flange nuts (1/4 inch) as shown in
1. Washer-fluid-tank bracket
2. Dash reinforcement
4. Torque the flange nuts (1/4 inch) to 1,017 to 1,243
N∙cm (90 to 110 in-lb).
Figure
2.
Figure 2
3. Washer-fluid-tank bracket
4. Carriage bolt (5/16 x 3/4
inch)
Figure 3
3. Flange-head screw (1/4 x
5/8 inch)
4. Flange nut (1/4 inch)
Routing and Connecting the Hose
1. Raise the machine with jack stands.
2. Connect the female straight fitting to the cab hose and
the male straight fitting to the kit hose
1. Cab hose
2. Female straight fitting
3. Connect the female straight fitting on the kit hose to
the male straight fitting on the cab hose
Figure
3.
1. Female straight fitting
4. Route the kit hose along the floor-channel plate and
through the opening in frame channel
3
(Figure
Figure 4
3. Male straight fitting
4. Kit hose
(Figure
Figure 5
2. Male straight fitting
(Figure
4).
5).
6).
Advertisement
