Advertisement
Figure 45
1. Hole—pillar A (driver's
side)
2. Washer pump wire
harness
3. Route the wire harness forward, between the electrical
mounting plate and the fender to the machine
45
and
Figure
46).
4. Route the wire harness for the washer pump inboard
toward the washer-fluid tank, and align the harness
with the 2-blade connector on the washer-pump motor
(Figure
46).
3. Fender
4. Electrical mounting plate
(Figure
1. 2-socket connector
(washer pump wire
harness)
2. Washer pump wire
harness
3. 2-blade connector (washer
pump)
Connecting the Wire Harness to the
Washer Pump
1. Align the 2-socket connector of the wire harness for
the washer pump to the 2-blade connector of the
washer pump
(Figure
1. 2-blade connector (washer
pump)
2. Push the wire-harness connector onto the pump until
the connector fully seats
16
Figure 46
4. Electrical mounting plate
5. Fender
6. Front of the machine
47).
Figure 47
2. 2-socket connector
(washer pump wire
harness)
(Figure
47).
Advertisement
