Advertisement
Installing the Overhead-Console Plug
and the Roof Panel
1. Align the plug that you removed in step
the Roof Panel (page 12)
overhead console
(Figure
2. Push the plug down into the overhead console until
it fully seats
(Figure
3. Align the holes in the roof panel with the clip nuts on
the brackets of the cab frame
4. Assemble the roof panel to the cab frame with the 10
bolts (1/4 x 1 inch) and 10 sealing washers (1/4 inch)
as shown in
Figure 33
Removing the Roof Panel (page
5. Torque the bolts to 520 to 678 N∙cm (41 to 55 in-lb).
Connecting the Battery
1. Connect the negative-battery cable; refer to your
Operator's Manual.
2. Lower the cargo box and close the hood; refer to your
Operator's Manual.
3
of
Removing
with the top opening of the
34).
34).
(Figure
33).
that you removed in step
12).
1
of
18
Advertisement
