Sensors; Unbalanced Load Detection System; Cleaning And Maintenance - Bosch WAU28540TC Instruction Manual And Installation Instructions

Brightness
Possible setting values: 1 - 4
You can select position 3 and use the ˜
button to adjust the brightness of the
Touch-Display, e.g. '- „.
Possible setting values:
1 not very bright
2 normal level of
brightness
3 bright
4 very bright
Switching the drum-care information
signal on/off
You can select position 4 and use the ˜
button to switch the Drum Clean
information signal on or off, e.g. š- ‚.
Possible setting values:
0 off
1 on
H

Sensors

U nbalanced load detection
S e n s o r s
system
The automatic unbalanced load
detection system detects imbalances
and ensures even distribution of the
laundry by repeatedly starting and
stopping drum spinning.
If the laundry is extremely unevenly
distributed, the spin speed is reduced
or the spin cycle is not performed for
safety reasons.
Place large and small items of
Note:
laundry evenly in the drum.
2
Cleaning and
maintenance
:
Warning
C l e a n i n g a n d m a i n t e n a n c e
Risk of death!
There is a risk of electric shock if touch
live components.
Press the button # and pull out the
mains plug.
Caution!
Fire and explosion hazard!
Toxic vapours can be produced by
cleaning agents that contain solvents,
e.g. cleaning solvent.
Do not use cleaning agents that contain
solvents.
Caution!
The appliance may be damaged!
Cleaning agents that contain solvents,
e.g. cleaning solvent, can damage
surfaces and components in the
appliance.
Do not use cleaning agents that contain
solvents.
Sensors
en
37