Related Manuals for Bosch WAU28P02NL
Summary of Contents for Bosch WAU28P02NL
- Page 1 Translated from Dutch to English - www.onlinedoctranslator.com Washing machine WAU28P02NL [ N] User manual and installation instructions...
-
Page 2: Table Of Contents
Refer to the Digital User's Guide for more information. Table of contents 1 Safety........4 6 Before first use ..... 20 1.1 General instructions ..... 4 6.1 Starting a wash cycle without 1.2 Destination of the device laundry ..........20 rate .......... - Page 3 15 Intelligent Dosing System ..36 15.1 Starting program with intelligent dosing system ....36 15.2 Filling the dosing tank ....37 15.3 Contents of the dosing container........38 15.4 Basic Dosage Quantity ....38 16 Basic settings ..... 39 16.1 Overview of the basic settings ........
-
Page 4: Safety
NLSafety 1 Safety Please observe the following safety instructions. 1.1 General instructions ¡Read this manual carefully. ¡Keep the operating instructions and product information for future reference for use or for subsequent owners. ¡Do not connect the device in case of transport damage. 1.2 Destination of the device Only use the device: ¡to wash machine washable textiles and woollens for hand washing... -
Page 5: Secure Installation
SafetyNL 1.4 Secure installation Observe the safety regulations when installing the device. WARNING ‒ Risk of electric shock! Improper installations are dangerous. ▶ Only connect and operate the device in accordance with the information on the rating plate. ▶ Only connect the device to an alternating current mains via a properly installed socket with earthing contact. - Page 6 NLSafety ▶ Only use adapters and power cords approved by the manufacturer. ▶ If the power cord is too short and a longer power cord is not available, contact an electrical retailer to adjust the home installation. WARNING ‒ Risk of injury! The heavy weight of the device can cause injuries when lifting it.
-
Page 7: Safer Use
SafetyNL There is a tripping hazard if hoses and mains connection cables are laid incorrectly. ▶ Lay the hoses and connecting cables in such a way that they cannot be tripped over. If the appliance is moved by protruding parts, such as the loading door, the parts may break off. - Page 8 NLSafety WARNING ‒ Risk of health hazard! Children can lock themselves in the appliance and endanger their lives. ▶ Do not install the device behind a door that blocks or prevents the opening of the device door. ▶ In the case of discarded appliances, unplug the mains cable, then cut the mains cable and damage the appliance door lock to such an extent that the appliance door no longer closes.
-
Page 9: Safe Cleaning And Maintenance
SafetyNL Reaching into the rotating drum can lead to hand injuries. ▶ Wait until the drum has come to a complete stop before reaching into the drum with your hand. CAUTION ‒ Risk of burns! The suds become hot when washing at high temperatures. ▶... - Page 10 NLSafety WARNING ‒ Risk of injury! The use of non-original spare parts and accessories is dangerous. ▶ Only use original spare parts and original accessories from the manufacturer. WARNING ‒ Risk of poisoning! Toxic fumes may be produced when using cleaning agents containing solvents.
-
Page 11: Avoiding Property Damage
Avoid material damageNL Make sure that the length of the ▶ 2 Material damage thread on the connection to the avoid water tap is at least 10 mm. Follow this instruction to avoid A water pressure that is too low or too high can material damage and damage to the hinder the function of the device. -
Page 12: Environmental Protection And
NLEnvironmental protection and saving ▶ Reduce washing temperature for In case of contact with the device, lightly and normally soiled laundry. immediately remove all detergent residues, spray mist residues or residues. aAt low temperatures, it consumes device less energy. Lower temperatures than stated on the 3 Environmental protection and care label are also sufficient for... -
Page 13: Energy Saving Mode
Set up and connectNL 3.3 Energy Saving Mode 4.2 Package Contents If you do not operate the device for a After unpacking, check all parts for longer period of time, it transport damage and the automatically switches to energy completeness of the delivery. saving mode. -
Page 14: Removing Transport Protection Devices
NLSet up and connect WARNING Place of installation To demand Risk of injury! kitchen The device al- When used on a plinth, the device can borrow under one tip over. continuous work The device feet for commissioning ▶ place sheet, on a plinth must always be fitted that with the with the fixings... -
Page 15: Connecting The Device
Set up and connectNL Loosen and remove all bolts of the 4 Install the 4 covers. transport protection devices with an open-end wrench SW13 Push down the 4 covers. Remove the mains connection cable from the holder. 4.5 Connecting the device Connect water supply hose Remove the 4 sleeves. -
Page 16: Adjusting The Appliance
NLSet up and connect Connect the water inlet hose to the plastic stand The water tap (26.4 mm = 3/4"). pipe with rubber feeding hose with a bend run muff or one → Page 32 floor drain fix and bor- gene. -
Page 17: Connecting The Device Electrically
Set up and connectNL To adjust the device, turn the device Insert the mains plug of the feet. Check the horizontal appliance's connecting cable into adjustment of the device with a a socket in the vicinity of the spirit level. appliance. -
Page 18: Getting To Know Your Device
NLGet to know your device 5 Get to know your device 5.1 Device Here you will find an overview of the components of your device. Depending on the device type, details on the image may differ, e.g. the color the vor Service valve n pump Transport protections →... -
Page 19: Control Panel
Get to know your deviceNL Manual dosing compartment / : dispenser for fabric softener or liquid detergent : dispenser for liquid detergent 1 2 3 5.3 Control panel You can use the control panel to set all the functions of your device and obtain information about the operating status. -
Page 20: Before First Use
NLusage change or deactivate a gene by Approx. Pour 1 liter of tap water into pressing the relevant button on the the manual dosing compartment. display again. Violent impact on the display can cause damage. ▶ Do not exert strong pressure on the display. - Page 21 usageNL Start the first wash cycle or press to switch off the appliance. → "Essentials of the Ministry", Page 33...
-
Page 22: Display
NLdisplay 7 Display The display shows the current set values, selection options or information texts. Example display indication display More information Designation 0:40 Expected program duration or remaining Program duration / remaining time of time of the program in hours and minutes. the program →... - Page 23 displayNL display More information Designation Energy consumption for the set program. Energy consumption ¡ : lower energy consumption ¡ : higher energy consumption Water consumption for the set Water consumption program. ¡ : lower water consumption ¡ : higher water consumption Signal Basic setting Keypad tone...
- Page 24 NLdisplay display More information Designation Voltage control Flashing: The automatic voltage monitoring system detects impermissible undershoots learning system of the voltage. The program pauses. Remark:The program will continue when voltage is allowed again. Voltage control Flashing: The program has been paused due to impermissible voltage undershoots.
-
Page 25: Keys
TestsNL 8 Keys The selection of the program settings depends on the program set. Knob Choice More information (Start/Pause) ¡start Start, cancel or pause program. ¡Cancel ¡pause Speed ¡activate Activate or deactivate reduced program duration. ¡deactivate Remark:Energy consumption is getting higher. The washing result is not affected by this. - Page 26 NLTests Knob Choice More information - 1400 - 1400 Adjust the spin speed or deactivate the (spin) spin. Set spin speed in rpm. With the selection, the water is pumped out and the spin is deactivated. The laundry remains wet in the drum. (mains switch) ¡Switch Turn the device on or off.
- Page 27 TestsNL Knob Choice More information ¡activate Activate or deactivate wash with less (Anti wrinkle) crease. ¡deactivate To reduce creases in the laundry, the spin process and spin speed are adjusted. The laundry is so damp after washing that it hangs well on the washing line.
-
Page 28: Programs
NLPrograms 9 Programs Remark:The care labels of the laundry give you additional instructions for program selection. max. Program Description bela- thing (kg) Cotton Wash robust textiles made of cotton, linen and blended fabrics. Also suitable as a shortened program for normally soiled laundry if you activate Speed. - Page 29 ProgramsNL max. Program Description bela- thing (kg) Fast mix Wash textiles made of cotton, linen, synthetic material and blended fabrics. Suitable for lightly soiled laundry. Program setting: ¡max. 60 °C ¡max. 1400 rpm Delicate silk Wash delicate, washable textiles made of silk, viscose and synthetic fabrics.
- Page 30 NLPrograms max. Program Description bela- thing (kg) ¡max. 1400 rpm Sport Wash sports textiles and leisure textiles made of synthetic, microfibre and fleece. Use a sports fabric detergent. Do not use fabric softener. Tip:Wash heavily soiled laundry with Easy Care programme.
- Page 31 ProgramsNL max. Program Description bela- thing (kg) Halve the amount of detergent to avoid foaming. Do not use fabric softener. Do not use wool, delicate or liquid detergent. Remark:If you have not used a program with a temperature of 60°C or higher for a long time, the drum cleaning indicator flashes as a reminder.
-
Page 32: Accessories
– Brush sand out of all covers and instructions by scanning the QR code pockets in the table of contents or at – Close duvet covers and cushion www.bosch-home.com. covers – Close zips, Velcro fasteners, 11.1 Preparing laundry hooks and eyes –... -
Page 33: Detergent And Fabric Care
QR code programmes in the table of contents or at www.bosch-home.com. 12 Detergent and fabric 13.1 Switching on the device means of care Required:The device is set up and connected correctly. -
Page 34: Settings
NLService Adjust the program settings. ▶ Requirements ¡The laundry is prepared and → "Buttons", page 25 sorted. → "Laundry", page 32 Take the information on the ¡The drum is empty. subject of operating logic → Page 19 in mind. Open the door. Place the laundry in the drum. -
Page 35: Starting The Program
ServiceNL At high temperature and high 13.7 Starting the program water level, the door of the appliance remains locked for safety reasons. Required:A program is set. – At a high temperature, start the → "Set program", page 33 programmeTo rinse. –... -
Page 36: Child Lock
NLChild lock container for manual dosing. 14 Child lock → "Dosing detergent and fabric care product", page 34 Secure your device against unwanted If you want to dose manually for a set operation via the controls. program, please observe the following instructions: ¡Deactivate the intelligent dosing 14.1 Switching on the child lock... -
Page 37: Filling The Dosing Tank
Intelligent dosing systemNL If desired, the contents of the Open the filling lid. dosing reservoirs → Page 38 to adjust. If desired, the basic dosing amount → Page 38 to adjust. Adjust the program settings if desired. → "Adjust program settings", page Start the program. -
Page 38: Contents Of The Dosing Container
NLIntelligent dosing system Remark:To adjust the base dose 15.3 Contents of the dosing amount, repeat the steps with i DOS. container Comments ¡When you view the contents of the the dosing reservoir changes, then the basic dosage for this dosing reservoir is reset. -
Page 39: Basic Settings
Basic settingsNL 16 Basic Settings You can set the basic settings of your device according to your wishes. 16.1 Overview of the basic settings Symbol Value Description Basic setting ling Signal 0 (off) Set the volume of the signal after 1 (soft) the program end. -
Page 40: Changing Basic Settings
Do not clean the pump unit in the instructions by scanning the QR code dishwasher or immerse it in water. in the table of contents or at Protect the electrical connections ▶ www.bosch-home.com. on the back against moisture, detergent and fabric softener 17.1 Cleaning drum residues. CAREFULLY Turn off the device. - Page 41 Cleaning and maintenanceNL Press the insert down and remove Empty the detergent drawer. the detergent drawer. Clean the pump unit with a Remove the pump unit. damp cloth. Unlock and remove the lid of the Clean the detergent drawer and lid detergent drawer.
-
Page 42: Cleaning The Drain Pump
NLCleaning and maintenance Turn off the device. Disconnect the plug of the device from the power supply. Open and remove the service cover. Place a sufficiently large container under the opening. Clean the housing of the detergent drawer in the appliance. Remove the drain hose from the holder. - Page 43 Cleaning and maintenanceNL Clean drain pump CAUTION - Risk of burns!The suds become hot when washing at Required:The drain pump is empty. → Page 42 high temperatures. Since there may still be residual ▶ Do not touch the hot soapy water. water in the pump, carefully Remove the plug to allow the washing unscrew the cover.
- Page 44 NLCleaning and maintenance Fit the pump cover. Before next wash Check that the pump cover To prevent unused detergent from ‒ components are fitted correctly. flowing into the drain during the next wash, run a suitable draining program after emptying the pump. Open the water tap.
-
Page 45: Troubleshooting
TroubleshootingNL 18 Troubleshooting You can rectify minor faults on the device yourself. Before contacting customer service, please refer to the troubleshooting information. This way you avoid unnecessary costs. WARNING Risk of electric shock! Improper repairs are dangerous. Only trained specialist personnel may carry out repairs on the device. ▶... - Page 46 NLTroubleshooting Cause and Troubleshooting Malfunction "E:36 / -10" When dosing manually, reduce the amount of ▶ detergent for the next wash with the same load. Unauthorized extension fitted to the water drain hose. Remove unauthorized extensions to the water drain ▶...
- Page 47 TroubleshootingNL Cause and Troubleshooting Malfunction Open the water tap. "E:30 / -10" and/or ▶ Water supply hose is kinked or pinched. Make sure that the water supply hose is not ▶ kinked or trapped. Water level measuring system defective. Remark:With the error message, the device starts a pump-down procedure.
- Page 48 NLTroubleshooting Cause and Troubleshooting Malfunction burns. Temperature is too high. Wait for the temperature to drop. ▶ → "Program cancel", page 35 ▶ Water level is too high. Select a suitable program for draining. ▶ → "Programs", page 28 flashes. Door is not closed.
- Page 49 TroubleshootingNL Cause and Troubleshooting Malfunction To start the program, press Program does not start. Child lock is activated. → "Deactivate childproof lock", page 36 ▶ / is activated. Check if / is activated. ▶ → "Buttons", page 25 Laundry is jammed in the door. Open the door again.
- Page 50 NLTroubleshooting Cause and Troubleshooting Malfunction Door cannot be Open the door with the emergency release. ▶ → "Emergency release", page 57 opened. Drain pipe or water drain hose is clogged. Washing water is not pumped out. Clean the drain pipe and the water drain hose. ▶...
- Page 51 TroubleshootingNL Cause and Troubleshooting Malfunction No water flows into was not pressed. the device. The Press . ▶ detergent was not The strainers in the water supply are clogged. washed in. ▶ Clean the strainers in the water supply. Water tap is closed. Open the water tap.
- Page 52 NLTroubleshooting Cause and Troubleshooting Malfunction Vibration and movement Secure the device feet. of the ▶ → "Adjusting the device", page 16 device during during the centrifuge Transport protection devices have not been removed. run. → "Remove transport protection", page 14 . ▶...
- Page 53 TroubleshootingNL Cause and Troubleshooting Malfunction Program centrifuge Drain pipe or water drain hose is kinked or trapped. run does not start. Make sure that the drain pipe and the water ▶ drain hose are not kinked or trapped. The imbalance detection system has stopped the spin cycle due to uneven distribution of the laundry.
- Page 54 NLTroubleshooting Cause and Troubleshooting Malfunction Creasing. Unsuitable program for the type of fabric set. Choose a suitable program for the type of fabric. ▶ Centrifuge result is Low spin speed is set. not satisfied- Set a higher spin speed for the next wash. ▶...
- Page 55 TroubleshootingNL Cause and Troubleshooting Malfunction Leftover detergent Empty the dosing reservoirs. → "Cleaning the detergent drawer", Page the damp laundry. Clean the dosing reservoirs. Refill the dosing reservoirs. → "Fill the dosing tank", page 37 Basic dosing amount not set correctly. When the intelligent dosing is activated, reduce the ▶...
- Page 56 NLTroubleshooting Cause and Troubleshooting Malfunction Unsuitable detergent added to the dispenser of the Insufficient cleaning intelligent dosing system. generative effect. Check whether the detergent used is suitable. → "Detergent and fabric care product", page 33 Empty the dosing reservoirs. → "Cleaning the detergent drawer", Page Clean the dosing reservoirs.
-
Page 57: Emergency Release
→ "Start wash cycle without instructions by scanning the QR code laundry", Page 20 . in the table of contents or at www.bosch-home.com. Close the tap. Water supply hose empty. Switch on the device ate out. -
Page 58: Disposal Of Your Old Appliance
NLService department 19.4 Disposal of your old chemical equipment (waste electrical and electronic appliance equipment - WEEE). Valuable raw materials can be reused The directive sets out the through environmentally friendly framework for take-back disposal. valid in the EU and disposal of old appliances. - Page 59 Service departmentNL ¡on the inside of the bottom holding valve. ¡on the back of the device comb. To quickly find your device data and service telephone numbers, you can write them down.
-
Page 60: Consumption Values
NLConsumption values 21 Consumption values The following information is provided in accordance with the EU Ecodesign Regulation. The specified values for other programs asEco 40-60are only guide values and were determined in accordance with the applicable standard EN60456. The automatic dosing function has been deactivated for this purpose. Comparative test instructions: Deactivate the automatic dosing function, unless this function is the subject of the test. - Page 61 Technical dataNL Device depth 106.3 cm with opened door Weight 74.5 kg Maximum load 9.0 kg thing 220-240V, Mains voltage 50-60 Hz 10 A Minimum entry installation fuse Rated power 2300 W gene Recorded far- ¡Off state: 0.15W to be allowed to ¡Non-disabled attributed position: 0.50 W...
- Page 64 Contact data of all countries are listed in the attached service directory. BSH Hausgerate GmbH Carl-Wery-Strasse 34 81739 Munich, GERMANY www.bosch-home.com ABosch Company *9001766987* 9001766987(020727)