Table of Contents
Advertisement
Operating the appliance
en
Switching on the appliance/
selecting a programme
Press the # button till the indicator
lamp lights up, release the button. The
appliance is switched on.
The Cotton programme, which is preset
at the factory, is then always displayed.
You can use this programme or select a
different programme.
If you have activated the
Note:
childproof lock, you must deactivate it
before you can set a programme.
Presettings and maximum load are
indicated on the Touch-Display for the
selected programme.
You can use the displayed presettings
or adjust the selected programme
optimally to the items of washing by
changing the ~ "Programme default
settings" on page 28 and/or selecting
~ "Additional programme settings"
on page 29.
Changing the programme
default settings
You can use the default settings or
change them.
To do this, repeatedly select the
corresponding button until the required
setting is displayed.
The settings are activated without
needing to be confirmed.
They are not saved when the appliance
is switched off.
Programme default settings
~ Page 28
Overview of programmes ~
Supplementary sheet for the installation
and operating instructions.
32
Selecting the additional
programme settings
By selecting additional settings, you can
better adapt the washing process to
your items of laundry.
The settings can be selected or
deselected depending on the
programme progress.
The indicator lamp for the button lights
up if a setting is activated.
The settings are not saved when the
appliance is switched off.
Additional programme settings
~ Page 29
Overview of programmes ~
Supplementary sheet for the installation
and operating instructions.
Placing laundry into the drum
Insert the laundry.
Close the door.
Advertisement
Table of Contents
