Ambient Conditions During Storage, Installation, And Operation - Ulvac ULK-04A Instruction Manual

0.5.3 Ambient conditions during storage, installation, and operation

This product is a machine with precision clearances. Therefore satisfy the following conditions
during the storage, installation, and operation.
a. Corrosive and explosive gas are not allowed.
b. Freeze and condensation is not allowed.
c. Dust is not allowed.
d. The room shall be ventilated.
e. The pump is not allowed to double stack and turn over, and the heater and the oil level
gauge are not allowed to stand with their ends facing down.
f. Direct sunlight shall be avoided.
g. Keep away from heat sources.
Do not give an impact to or overturn the pump. Otherwise the pump
CAUTION
operation gets into trouble.
At the time of installation, turn up the pump air inlet flange (loose type flange) and fix it with bolts so
that the flange is in a horizontal position without looseness.
xii
SK00-4802-DI-002-04
No.16.10.20