Table of Contents
Advertisement
Technical Specifications
Alcotest
7410
®
Plus
Measurement range
Accurate between 0.000 % BAC to 0.400 % BAC.
Ambient conditions for storage
-40
to +149
F (-40
to +65
O
O
O
600 to 1300 mbar
10 to 98% relative humidity
Sample conditions
Blowing time
4 to 12 seconds (depending on intensity)
Flow rate
> 6 liters/minute
Volume
> 1.2 liters
Measurement accuracy
Reproducible with an ethanol standard:
0 to 0.100%
+/- 0.005% BAC
> 0.100%
+/- 5% of measured value
Dimensions
9.0 x 2.8 x 1.3 in (230 x 70 x 34 mm)
Weight
1.1 lb (0.5 kg)
Electrical power supply options:
1. Battery pack which holds three (3) rechargeable NiCd batteries.
Notes:
•
NiCd rechargeable battery packs will provide approximately 300
tests between charges.
C)
O
32
The LO BAT warning is displayed when the Alcotest
•
NiCd battery pack needs to be recharged. This will typically not
happen, as the EPAS internal central power system will usually
need charging before the Alcotest
however, when the LO BAT warning appears, there will be
enough time to complete the current test, and then it is recom-
mended that the Alcotest
recharged (approximately 24 hours).
Alcotest
7410 Printer
®
Environmental conditions for operation
32
to 122
F (0
to 50
C)
O
O
O
O
600 to 1300 mbar
10 to 98% relative humidity
Environmental conditions for storage
-40
to 158
F (-40
to 70
O
O
O
O
600 to 1300 mbar
10 to 98% relative humidity
Dimensions
5.6 x 5.3 x 1.9 in (140 x 133 x 48 mm)
Weight
1.0 lb (0.5 kg)
Power supply
Operating voltage: 9.5V to 17V / 1A
Consumption:
10 W for log printout, 200 mW in standby mode
Fuse:
M 1.0 A DIN 41571 (1x)
Batteries:
LR6 DIN IEC 86 (AA) (2ea)
(Usage period at 25
®
7410
NiCd battery pack;
®
Plus
7410
NiCd battery pack be fully
®
Plus
C)
C is approximately 2 years)
O
33
7410
Plus
Advertisement
Table of Contents
