Dräger EPAS Operating Manual page 17

Alcotest 7410
Plus
Error Code Cause
E6 Instrument Parameter
Error
E7 Instrument Parameter
Error
E8 Timing malfunction
Remedy
Contact Draeger Safety,
Inc., Breathalyzer
Division, Technical
Department.
Contact Draeger Safety,
Inc., Breathalyzer
Division, Customer
Support Department.
Instrument will power
down after 10 seconds.
Turn back on.
If problem persists,
contact Draeger Safety,
Inc., Breathalyzer
Division, Customer
Support Department.
30
Printer
Fault Cause
Not printing although Voltage too low, too
supply voltage is high, or wrong polarity
supplied.
Defective Fuse
Malfunction
Although supply Faulty power cord
voltage is available,
paper feed is irregular or Power supply
printer stops. inadequate or faulty
Mounting socket broken
Message Printed Cause
TRANSMISSION Incorrect log received
ERROR
HARDWARE ERROR Hardware error
Remedy
Detach unit from power
supply, provide voltage
greater than 9.5 V/1A
and less than 17V/1A.
Detach unit from power
supply and replace fuse
(1A).
Contact Draeger Safety,
Inc., Breathalyzer
Division, Customer
Support Department.
Replace power cord.
Provide voltage greater
than 9.5V/1A and less
than 17V/1A.
Contact Draeger Safety,
Inc., Breathalyzer
Division, Customer
Support Department.
Remedy
Position Alcotest 7410
®
again, or clean
Plus
transparent window or
lenses.
Contact Draeger Safety,
Inc., Breathalyzer
Division, Customer
Support Department.
31