Integrated Media Block/Server (Optional) - Barco DP K-32B Series User And Installation Manual

Input & communication
Source Port Port type
HD-SDI - 4K

6.6 Integrated Media Block/Server (optional)

Not available for purchase at Barco for use in Taiwanese market.
Depending on the projector configuration the projector card cage is either equipped with an ICP or
ICMP. In case an ICP is installed then an IMB, IMS, or HDSDI input module can be optionally
inserted into the slot below the ICP. This is not the case if the ICMP is installed. For more
information about the ICMP see chapter called ICMP.
Integrated Media Block (IMB)
Image 6-7: Example of IMB powered by Doremi.
Integrated Media Server (IMS)
Image 6-8: Example of IMS powered by Doremi.
Configuration and operation instructions for IMB and IMS are not included in this document. See
manufacturers website of the installed IMB/IMS for technical documentation and support.
90 R5905754 /13 DPxK-32B
General settings
Mode Scan type
4:2:2 10 Progressive
bits/color
Progressive SF -
1st field dominant
Progressive SF -
2nd field
dominant
Advanced settings
Color Pixel mapping
space
YCbCr HD-SDI - Quad
Link
YCbCr HD-SDI - Quad
Link
YCbCr HD-SDI - Quad
Link
Calibration
Single
Single
Single