Removing Transport Protection Materials For Intelligent Heat Exchangers - Huawei FusionModule1000A20 Installation Manual

FusionModule1000A20 Prefabricated All-in-One Data
Center
Installation Guide
No.
1
2
3
4
5
6
7
----End
8.2 Removing Transport Protection Materials for
Intelligent Heat Exchangers
Prerequisites
The pre-fab. modules have been installed.
Preparations
Transportation protection materials are installed for intelligent heat exchangers in the
FusionModule1000.
Tools: step ladder, Phillips screwdriver
Materials: none
Skill requirement: common technician
Procedure
Step 1 Remove the protective cover from the intelligent heat exchanger.
Issue 02 (2020-01-15)
Device
Photoelectric smoke
detector
Heat detector (optional)
Horn strobe (optional)
Fire alarm bell (optional)
Emergency light
Temperature and humidity
(T/H) sensor
Camera
Copyright © Huawei Technologies Co., Ltd.
8 Removing Transport Protection Materials
Protection Materials
Red cover, securing tape
Red cover, securing tape
Securing tape
Securing tape
Securing tape
Securing tape
Securing tape
78