About This Document - Huawei FusionModule1000A20 Installation Manual

FusionModule1000A20 Prefabricated All-in-One Data
Center
Installation Guide
Purpose
This document describes the site requirements for installing the FusionModule1000A
prefabricated all-in-one data center (FusionModule1000A for short) as well as the methods
and skills required for installing pre-fab. modules, pipes, and cables, providing installation
guidance and technical support for onsite installation personnel and technical support
engineers.
Intended Audience
This document is intended for:




Symbol Conventions
The symbols that may be found in this document are defined as follows.
Symbol
Issue 02 (2020-01-15)
Hardware installation engineers
Technical support engineers
Commissioning engineers
Maintenance engineers
Copyright © Huawei Technologies Co., Ltd.

About This Document

Remarks
Indicates a hazard with a high level of risk which, if not
avoided, will result in death or serious injury.
Indicates a hazard with a medium level of risk which, if
not avoided, could result in death or serious injury.
Indicates a hazard with a low level of risk which, if not
avoided, could result in minor or moderate injury.
Indicates a potentially hazardous situation which, if not
avoided, could result in equipment damage, data loss,
performance deterioration, or unanticipated results.
NOTICE is used to address practices not related to
personal injury.
About This Document
ii