WisyCom MRK960 User Manual page 25

MRK960 dual true diversity receiver
Options specifications:
• • Low impedance transformer on audio lines (option XRL950, XRC950): Analog audio outputs are galvani-
cally isolated by means of a high quality low impedance shielded transformers.
o utput level: 12dBu nom., 18dBu at max FM deviation
»
o utput impedance: < 30Ω (e.g. could drive at least 300m of high quality twisted pair audio cable without
»
degradation in frequency response)
• • COM audio output (option PTT950): same specifications as LINE audio output
• • GPI output (option PTT950): normally open opto-relay isolated output,
AC/DC 56Vpk max - 100mAmax.
»
10 ohm max on resistance.
»
1/4" (6.3 mm) stereo jack connector (2 pins for relay contact + receiver ground)
»
• • Ethersound® (option ETS950): interface enable the connection of the MRK950EX on a Ethersound® network
for multichannel digital audio distribution on a single cat.5 Ethernet compatible cable.
Needs DSP audio board installed.
»
T wo RJ45 connectors for input and output data lines
»
Pag. 25