Rail Kit Wheels (Optional) - Toro Greensmaster 1018 Service Manual

Rail Kit Wheels (Optional)

Removing the Rail Kit Wheel
Installing the Rail Kit Wheel
Controls, Wheels and Accessories : Service and Repairs
g261683
1. Wheel hex shaft
2. Wheel clip
1. Park the machine on a level surface. Ensure that the engine is OFF and
the traction control is in NEUTRAL.
2. Support the machine onto the kickstand.
3. Remove the wheel clip, and remove the rail kit wheel from the wheel hex
shaft on each side.
4. If necessary, install the transport wheels; refer to
(page 7–27).
1. Ensure that the machine is parked on a level surface.
2. Support the machine onto the kickstand.
3. If installed, remove the transport wheels; refer to
(page 7–27).
4. Slide the rail kit wheel onto the wheel hex shaft and secure the wheel with
a wheel clip.
Figure 66
3. Rail kit wheel
Page 7–30
Transport Wheels (Optional)
Transport Wheels (Optional)
Greensmaster ® 1018/1021/1026
18238SL Rev B