Grooming Reel Mechanical Problems - Toro Greensmaster 1018 Service Manual

Grooming Reel Mechanical Problems

Troubleshooting:
Problem
No rotation of the grooming
reel.
The turf is damaged or has
uneven grooming.
Possible Causes
Groomer drive gears are worn
or damaged.
The groomer is set too
aggressively.
The grooming reel blades are
bent, damaged or missing.
The grooming reel shaft is
bent or damaged.
Grooming depth is not equal
on both ends of grooming reel.
Page 3–6
Correction
Inspect groomer drive
assembly and replace
damaged drive components.
Refer to groomer Installation
Instructions for groomer set-up
information.
Repair or replace blades if
necessary.
Replace grooming reel shaft.
Adjust depth if necessary.
Check and adjust cutting unit
set up (level bed knife to reel,
set height-of-cut, etc.).
Greensmaster ® 1018/1021/1026
18238SL Rev B