Clutch And Reel Drive Engagement Lever Assembly - Toro Greensmaster 1018 Service Manual

Clutch and Reel Drive Engagement Lever Assembly

g260277
1. V-ring seal
2. Reel lever handle rod
3. Knob
4. Retaining ring
5. Control shaft clamp (2 each)
6. Socket head screw (4 each)
7. Extension spring (2 each)
8. Controls cover
9. Bolt and washer assembly (8 each) 18.
Disassembling the Clutch and Reel Drive Engagement Lever Assembly
Controls, Wheels and Accessories : Service and Repairs
10. Lower handle cover
11. Reel cable
12. Clutch cable
13. Cotter pin clip
14. Link assembly
15. Main control shaft
16. Split bushing (2 each)
17. Socket cap
Cotter pin clip
Note: Refer to Figure 56
1. Park the machine on a level surface. Ensure that the engine is OFF and
the traction control is in NEUTRAL.
2. Remove the spark plug wire from the engine spark plug.
Figure 56
19.
20.
21.
22.
23.
24.
25.
26.
27.
during this procedure.
Page 7–14
Clevis connector
Clevis pin (4 each)
Extension spring
Shoulder screw
Reel lock lever assembly
Bail latch spacer
Upper receiver weldment
Flange nut
Reel lever assembly
Greensmaster ® 1018/1021/1026
18238SL Rev B