Table of Contents
Advertisement
4
Installing the Fixed Plate
Kit (Optional)
Parts needed for this procedure:
1
Fixed plate kit (not included)
Procedure
1.
Remove the nuts and washers securing the lift
links to the cutting-unit side plate and carrier
frame
(Figure
7).
1. Nuts
2.
Using the number 2 holes, insert a fixed plate
onto the bolts and secure it with the nuts
removed.
Note:
The number 1 holes are to be positioned
toward the front. Do not reuse the washers.
Note:
The number 1 hole is a less aggressive
setting and the number 3 hole is a more
aggressive setting.
Figure 6
2. Washers
1. Nuts
3.
Loosen the locknuts securing the height-of-cut
brackets to the cutting-unit side plates
g011962
1. Height-of-cut bracket
2. Locknut
4.
Remove the height-of-cut brackets and the roller
from the cutting unit.
5.
Repeat the procedure on the remaining cutting
units.
6
Figure 7
2. Fixed plate
(Figure
Figure 8
3. Adjusting screw
g011963
8).
g003326
Advertisement
Table of Contents
