Getting Started; Description Of Keypad Functions; Description Of Lcd Annunciators - palintest Micro 600 Manual

Ph meter

Hide thumbs Also See for Micro 600:

Table of Contents

The Micro 600 pH has four keys, on its

splash-proof keypad as shown here:

ON/OFF Powers the meter on and off. Upon

power on, the meter automatically

begins in the measurement mode

that was last used.

CAL

Press to begin calibration of the

selected mode. Press again during

calibration to abort calibration and

return to measurement mode without

confirming any values.

During setup mode, function is similar

to "escape" or "go back", returning to the previous screen.

With meter off, press and hold CAL to select the reset menu

(rSt) while powering on.

MODE Selects measurement modes (pH, mV, & Temperature).

With meter off, press and hold MODE/INC to access the bUf

INC

(buffer), CAL (calibration), and ELE (electrode) setup menus while

powering on. Press MODE/INC again to change setup menus.

Increment for Temperature setting and calibration.

HOLD

Freezes measured reading. Press again to resume live reading.

ENTER Confirms calibration value in calibration mode and confirms

selections in SETUP mode.

The custom LCD consists of 3½-digit segments which uses annunciators for pH, mV

or ºC (Temperature). No annunciator is shown in Ion mode. Other annunciators

include "HO" (when HOLD function is activated) and "LO" (low battery condition).

Getting Started

Table of Contents