IBM TS4300 3555 User Manual page 197

Figure 93. Leader pin in the incorrect and correct positions
To reposition the leader pin:
1. Slide open the cartridge door (
need to shake the cartridge gently to roll the pin toward the door).
2. With plastic or blunt-end tweezers, grasp the leader pin and position it in the pin-retaining spring clips
3 .
3. Press the leader pin gently into the clips until it snaps into place and is firmly seated.
4. Close the cartridge door.
Figure 94. Placing the dislodged leader pin into the correct position
5. To rewind the tape, insert the cartridge manual rewind tool (
cartridge's hub 2 and turn it clockwise until the tape becomes taut.
1 in Figure 94 on page 167) and locate the leader pin
1 in Figure 95 on page 168) into the
Appendix B. LTO media 167
2 (you might