IBM TS4300 3555 User Manual page 128

Table 36. Warning events (continued)
Event Code Message Text and Description
4065 A tape alert flag was reported by a drive.
4067 Cleaning cartridge will soon expire and
must be replaced.
4072 No cleaning cartridge in logical library
available for auto cleaning.
4073 Medium source element empty.
4074 Medium source element empty.
4075 Cartridge lost while it was extracted from
slot/drive.
4077 Unlocking the right magazine failed.
4078 Unlocking the left magazine failed.
4079 Unlocking the I/O station failed.
98 IBM TS4300 Tape Library Machine Type 3555: User's Guide
Details and Solution
Look for logged TapeAlert flags and see its
description in the "TapeAlert flags" on page
108 section.
Replace the cartridge.
• Auto cleaning is enabled, but the logical
library contains no labeled cleaning cartridge.
The library was unable to complete the auto
clean function for one or more drives in this
logical library.
• Install a valid and labeled cleaning cartridge
into the logical library and then complete a
load and unload on the drive that needs
cleaning to start the auto cleaning.
Check the source slot visually and rescan the
inventory. Additionally, check for valid and
readable bar code label.
Check the source slot visually and rescan the
inventory. Additionally, check for valid and
readable bar code label.
Check the source/destination element and
ensure that no obstructions are in the pathway
of the accessor.
• Restart the library and retry the operation.
• If the error persists, replace the chassis.
• If the magazine needs to be removed to get
access to the tape cartridges, first power
down the device, and then release the
magazine manually. Only one magazine can
be open at a time.
• Restart the library and retry the operation.
• If the error persists, replace the chassis.
• If the magazine needs to be removed to get
access to the tape cartridges, first power
down the device, and then release the
magazine manually. Only one magazine can
be open at a time.
• Restart the library and retry the operation.
• If the error persists, replace the chassis.
• If the I/O station needs to be removed to get
access to the tape cartridges, first power
down the device, and then release the
magazine manually. Only one magazine can
be open at a time.