Operating Precautions - Toshiba G9000 Series Installation And Operation Manual

TABLE 6.2 – 1:
Item
Storage Location
Ambient Temperature
Relative Humidity
Dust
Flammable Gas
6.3

Operating Precautions

Initial startup/commissioning of the UPS & SCiB Energy Storage System should be performed by factory authorized per-
sonnel.
1. The UPS & ESS system should not be powered up until the entire operation manual has been read.
2. DO NOT insert metal objects or combustible materials in the ventilation slots of the SCiB ESS.
3. DO NOT place, hang, or paste any objects on the exterior surfaces of the SCiB ESS.
4. DO NOT attempt to disassemble, modify, or repair the SCiB ESS. Call your Toshiba sales representative for repair
information.
5. Turn the power on only after installing ALL of the covers.
6. DO NOT remove any covers of the SCiB ESS when power is on.
7. If the SCiB ESS should emit smoke or an unusual odor or sound, remove power from the input and disconnect the
load from the output of the system immediately.
8. Operating temperatures:
a. Minimum: 32°F (0°C)
b. Maximum: 104°F (40°C)
G9000 Series SCiB Energy Storage Cabinet Installation and Operation Manual – 98485-002
SCIB ESS STORAGE/OPERATING ENVIRONMENT STANDARD
Environment standard
Indoors
Minimum storage temperature: 32 °F (0 °C)
Maximum storage temperature: 104 °F (40 °C)
The relative humidity must be between 30 and 90% and without
condensation due to temperature changes.
Dust must not exceed normal atmospheric levels and must not
include conductive particles, silicone or oils.
No flammable and/or explosive gas.
Hydrogen sulfide (H
Sulfurous acid gas (SO
Chlorine gas (Cl )
2
Ammonia gas (NH
Nitrous acid gas (NO
Nitrous oxides (NOx)
Ozone (O )
3
Hydrochloric acid mist (HCl) Less than or equal to 0.1 mg/m
S) Less than or equal to 0.0001 PPM
2
) Less than or equal to 0.05 PPM
2
Less than or equal to 0.002 PPM
) Less than or equal to 0.1 PPM
3
) Less than or equal to 0.02 PPM
2
Less than or equal to 0.02 PPM
Less than or equal to 0.002 PPM
3
15