Operating Precautions - Toshiba 288V Installation And Operation Manual

TABLE 6.2 – 1:
Item
Storage Location
Ambient Temperature
Relative Humidity
Dust
6.3

Operating Precautions

Initial startup/commissioning of the UPS & SCiB Energy Storage System should be performed by factory authorized per-
sonnel.
1. The UPS & ESS system should not be powered up until the entire operation manual has been read.
2. DO NOT insert metal objects or combustible materials in the ventilation slots of the SCiB ESS.
3. DO NOT place, hang, or paste any objects on the exterior surfaces of the SCiB ESS.
4. DO NOT attempt to disassemble, modify, or repair the SCiB ESS. Call your Toshiba sales representative for repair
information.
5. Turn the power on only after installing ALL of the covers.
6. DO NOT remove any covers of the SCiB ESS when power is on.
7. If the SCiB ESS should emit smoke or an unusual odor or sound, remove power from the input and disconnect the
load from the output of the system immediately.
8. Operating temperatures:
a. Minimum: 32°F (0°C)
b. Maximum: 104°F (40°C)
288V SCiB Energy Storage System Installation and Operation Manual – 203810-000
SCIB ESS STORAGE/OPERATING ENVIRONMENT STANDARD
Environment standard
Indoors
Minimum storage temperature: 32 °F (0 °C)
Maximum storage temperature: 104 °F (40 °C)
The relative humidity must be between 30 and 90% and without
condensation due to temperature changes.
Dust must not exceed normal atmospheric levels and must not
include conductive particles, silicone or oils.
15