Appendices; Troubleshooting; Image Problems - Ricoh PJ LU6000 Series User Manual

Appendices

Troubleshooting

If you experience a problem with your projector, please refer to the
following information. If a problem persists, please contact your local
reseller or service center.

Image Problems

No image appears on-screen
` Ensure all the cables and power connections are correctly and securely
connected as described in the "Installation" section.
` Ensure the pins of connectors are not crooked or broken.
` Make sure you have removed the lens cover and the projector is switched
on.
Partial, scrolling or incorrectly displayed image
` Press "AUTO" on the control panel or the remote control.
` If you are using a PC:
- For Windows Vista, Windows 7:
1. Open the "My Computer" icon, the "Control Panel" folder, and
then double click on the "Display" icon.
2. Select the "Settings" tab.
3. Verify that your display resolution setting is lower than or equal to
WUXGA(1920 x 1200).
4. Click on the "Advanced Properties".
If the projector is still not projecting the whole image, you will also need to
change the monitor display you are using. Refer to the following steps.
1. Verify the resolution setting is lower than or equal to
WUXGA(1920 x 1200).
2. Select the "Change" button under the "Monitor" tab.
3. Click on "Show all devices". Next, select "Standard monitor types"
under the SP box; choose the resolution mode you need under
the "Models" box.
4. Verify that the resolution setting of the monitor display is lower
than or equal to WUXGA(1920 x 1200).
66