Led Status Indicators - Ricoh PJ LU6000 Series User Manual

LED Status Indicators

The LED status indicators are located on the rear of the projector. Each LED is
defined below.
LED Type LED Status
Off
Solid Orange
Light LED
Solid Green
Flashing Red
Off
Off
Solid Green
Flashing Green
Status LED
Flashing Orange
Flashing
(alternating) Green/
Orange
Solid Red
Flashing Red
Solid Green
AV Mute
Solid Orange
Projector State
Laser diode is off
Laser diode time has expired
Laser diode is on and operating correctly
When projector has lost over 60% initial luminance
AC power is off (without AC plug in)
AC has been applied, projector is in standby mode
NOTE: Status LED cannot be flashing red, as this is
reserved for an error condition. Status LED is off but
keypad LED will indicate Standby Mode.
Projector is powered up and operating normally
Projector communications
Projector is in cool down mode or startup mode
Projector is in flash update state
Over-temperature
Fan failure
Light is on - image is displayed
Light is on - image is blank
30