Turn the Projector On
1.
Ensure that the power cord and signal cable are securely connected. The
Power button on the built in keypad is illuminated.
2.
Turn on the projector by pressing "
the built-in keypad. The Status LED is Orange with a long blink.
3.
Turn on the source. Press the Input key on the remote control to select an input
source (VGA, HDMI, or Component).
4.
The projector detects the source you selected and displays the image.
NOTE:
The first time the projector is used, the preferred language may be selected from the main menu after the startup screen is
displayed.
Power on
2
3
" on the remote control or press " " on
3
ON
1
2
4
5
7
8
0
Info
Auto
Input Key
Enter
Menu
Gamma Bright
Cont.
Lens H
Lens V
Keystone H
Keystone V
AV Mute
Hot Key
40
2
OFF
3
6
9
Mode
Input
Exit
PIP
Focus
Zoom
Pattern