User Controls; Operation - Ricoh PJ LU6000 Series User Manual

User Controls

OPERATION

The projector has multilingual On-Screen Display (OSD) menus that allow you to
make image adjustments and change a variety of settings.
• Most of the projector controls are accessed from within the projector menu sys-
tem. There are several groups of related functions, with each group selectable
from the Main menu as shown below. Press the MENU button on the remote
control or on the built-in keypad on the rear of the projector to display the main
menu.
• Use the arrow keys to navigate within the menu and adjust a setting up or
down.
• Press ENTER to select a highlighted menu item or use it to change or accept a
value.
• Select the next item that you want to adjust in the menu and adjust it as de-
scribed above.
• Press EXIT to return to the previous menu or exit menus if at top level.
PICTURE
OUTPUT
SETUP
OPTION
NOTE:
If the text is gray color, user is unable to enter the menu when the projector does not detect any input source.
™
If the text is white color, user is able to select the menu when the projector does not detect any input source.
™
Display Mode
Brightness
Contrast
Sharpness
Color
Tint
Phase
Frequency
Horz Position
Vert Position
PICTURE
46
Presentation
50
50
2
50
50
50
50
50
50