Soyal AR-327-E Manual

SOYAL
ACCESS CONTROL SYSTEM
Contents
AR-327-E:Touch-panel Metal Case
1 Products 2 User Guide
AR-727-E
1 Products 2 User Guide
Installation
AR-327-E
3
4
1
2
5
AR-727-E
4
1
2
3
5
Connector Table
Cable: CN4
P1
Wire Application Wire
Lock Relay 1 Blue White (N.O.)DC24V1Amp
2 Purple White (N.C.)DC24V1Amp
Lock Relay COM 3
Door Contact 4 Orange
Exit Switch 5
Alarm Relay 6
Power 7 Thick Red
8 Thick Black DC 0V
Cable: P2 CN5
Wire Application Wire
Beeper 1
2
LED
3
Door Output 4 Blue White
5 Thin Green Wiegand DAT: 0 Input
Wiegand
6 Thin Blue
WG Door Contact 7
WG Exit Switch 8
Cable: P3 CN7 Wire Application Wire
(AR-327H-V5 By
order)
TCP/IP Module
Output
®
3 Terminal Cables
CN4
CN6 CN3 CN8
3 Terminal Cables
CN4 CN5
CN6 CN3
Pull the cables from the square hole of the mounting plate.
Use a screw to the mounting plate onto the wall.
Attach the water proof strip to the body, then connect the terminal cables to the body
and attach the body to the mounting plate.
Use the Allen key and screws (accessories supplied) to assemble the body onto the
mounting plate.
Turn on the power, the LED will light and hear the beep sound, you will see "Ready""
on LCD board.
Attach the water proof strip to the mounting plate.
Pull the cables from the square hole of the mounting plate.
Use a screwdriver to screw the base onto the wall.
Connect the terminal cables to the body and attach the body to the mounting plate.
Assemble the covers with the Allen key and screws (accessories supplied).
Turn on the power, the LED will light and hear the beep sound, you will see "Ready""
on LCD board.
Color Description
White (COM)DC24V1Amp
Negative Trigger Input
Purple Negative Trigger Input
Gray N.O./N.C. Optional (by jumper)
DC 12V
Color Description
Pink Beeper Output 5V/100mA, Low
Yellow Red LED Output 5V/20mA, Max
Brown Green LED Output 5V/20mA, Max
Transistor Output Max. 12V/100mA
(Open Collector Active Low)
Wiegand DAT: 1 Input
Orange Negative Trigger Input
Purple Negative Trigger Input
Color Description
1 --- ---
2 --- ---
3 Orange White Net - TX+
4 Orange Net - TX-
5 Green White Net - RX+
6 Green Net - RX-
7 --- ---
AR-327-E / 727-E
4 Tools
CN5
Water proof Strip
CN7
CN2
Main PCB
7
6
5
4
3
2
(Optional)
1
327-E
CN18
Cable: P4
Wire Application
RS-485 for Lift
Controller
Cable: P5
Wire Application
Anti-Tamper
Switch
Cable: P6
Wire Application
Power
Security trigger signal
Arming
Duress
5 Optional
AR-721RB
AR-821RB Digital Relay
4 Tools 5 Optional
Water proof Strip
AR-821RB
Notice
1.Tubing: The communication wires and
power line should NOT be bound in the
same conduit or tubing.
2.Wire selection:Use AWG 22-24
Shielded Twist Pair to avoid star wiring
,CAT 5 cable for TCP/IP connection.
Don't equip reader and lock with the
same power supply. The power for
reader may be unstable when the lock
is activating, that may make the reader
malfunction.
3.Power supply:The standard
installation: Door relay and lock use the
same power supply, and reader use
independent power supply.
CN6
7
CN5
2
6
1
8
5
CN7
7
4
6
8
3
(Optional)
(Optional)
5
2 7
CN9 CN11
4
1 6
6
3
5
327-E
4
5
2
4
CN8
4 3
1
3
727-E
2
3
2
CN2
1
2
1
1
CN4
CN3
CN6
Wire Color Description
1 Thick Green RS-485(B-)
2 Thick Blue RS-485(A+)
CN3
Wire Color Description
1 Red N.C.
2 Orange COM
3 Yellow N.O.
CN8
Wire Color Description
1 Red DC 12V Output
2 Purple Security trigger signal Output
3 Red White Arming Output
4 Yellow White Duress Output
V200114
CN7
TCP/IP Module
and Cable
AR-721RB
Digital Relay
727H-V5 LCD-PCB
7
6
5
4
(Optional)
3
727-E
2
CN18
1
6
5
4
3
2
1