Renishaw RLP40 Quick Start Manual page 15

Key to the symbols
LED short flash
LED long flash
Deflect the stylus for less than 4 seconds to
move to the next menu option.
Deflect the stylus for more than 4 seconds to
move to the next menu.
To exit, leave the stylus untouched for more
than 20 seconds.
CAUTION: Do not remove the batteries whilst in configuration
mode. To exit, leave the stylus untouched for more than
20 seconds.
Placing the probe in configuration mode
3
2
> 5 s
1
LED check
Deflect the stylus and hold it
deflected until after the battery status
has been displayed at the end of the
review sequence.
Battery status
Battery good
or
To change the "Switch-on method",
go to the next page.

Battery low
1-11