GEM 553 Installation, Operating And Maintenance Instruction page 50

3. Place the valve body 1 against the next
valve body 1 in the desired position and
push them together with a slight rotating
movement.
1
4. Connect the valve body 1 to the valve
body 1 using cylindrical screws 22 and
spring washers 23.
23
22
1
23
22
553
1
1
50 / 68
5. Repeat steps 2-4 until the required
confi guration has been achieved.
A maximum of 10 modules may
be screwed together.
The individual valve bodies
and universal modules can
optionally be paired with each
other.
6. Insert the O-rings 21 into the valve
bodies 1 and the connection module R.
7. Push the connection modules L and R
into the valve bodies 1 with a slight
rotating movement until they stop.
1
L
21
8. Connect the connection modules L and R
to the valve bodies 1 using cylindrical
screws 22 and spring washers 23.
22 23
L
23
22
9. Install the accessories (see chapter 11.3
"Installation of accessories").
10. Connect the distribution valve to the
piping (see chapter 11.4 "Installation in
piping").
1
21 R
1
R