Separation Of Media; Process Value Measurement (Pressure/Temperature) - GEM 553 Installation, Operating And Maintenance Instruction

10.4

Separation of media

The distribution valve can be interrupted
at one or more optional points to separate
out media. This enables two media to be
controlled independently of each other.
Universal module to be used: Media
separator plate.
The media separator plate is only
open on one side.
10.5 Process value measurement
(pressure/temperature)
One or more sensors can be integrated into
the distribution valve at an optional point.
Universal module to be used: Sensor
mounting.
The sensor mounting is open on
both sides.
The sensor can also be integrated
into the media separator plate.
However, no realistic values would
be output by the non-existent fl ow.
47 / 68
553