Gude Expert Power Control 8032-1 Manual page 51

Configuration
rules also changes by one. This also applies to the index in the console commands.
A simple timer is directly "enabled", on a new complex timer the "enable trigger" option
must be switched on manually. You can set a probability and a scatter for the timer
rules. Here the rule is executed with 100% probability. A jitter of 0 means that the ac-
tion takes place exactly at the programmed time. As an action mode a ports can be
switched, alternatively a console command (CLI Cmd) can be executed.
On the "Action PortSwitch" tab the switching function can be set in more detail. Port 1
is switched on and switched off again after 1.5 hours.
Extending a Rule
For demonstration purposes, the simple timer from the previous example is extended
here:
51
Expert Power Control 8032 © 2020 GUDE Systems GmbH