Fitting The Appliance In Place; Mounting The Appliance In Place - Prolitec AirQ 380 Original Instructions Manual

5
Step 9 – Fitting the Appliance in Place
Place the appliance so that the big holes in the top of the back cover fit over the rounded locking
posts. In doing this, make sure the appliance is flush with the wall and the posts are in the holes of
the appliance. Slide the appliance downward to lock on the posts. Sometimes this slide requires a
slight tap on the top of the appliance with your hand.
Step 10 – Mounting the Appliance in Place
Now unlock and open the door and insert the long round-head screws into the holes in the lower
corners and into the anchors. Tighten the screws firmly.
15
AirQ 380/580 Installation