Hanging The Mounting Bracket; Positioning The Appliance - Prolitec AirQ 380 Original Instructions Manual

5
Step 7 – Hanging the Mounting Bracket
Hang the mounting bracket by holding the bracket so the top holes match up with the anchors, then
screw the 2 flat-head screws through the hole in the bracket into the anchors. Tighten the screws
firmly, but do not crack the bracket.
Step 8 – Positioning the Appliance
Take the power supply and plug the round plug into the hole that is located in the recess on the back
of the appliance.
The power-supply block can accommodate several different plugs for various countries. Install the
correct one and plug it into the wall receptacle.
Some installations do not accommodate mounting of the appliance over a power outlet. In this case,
untie the power cord and extend it to a nearby outlet using a conduit (not included - PN 10619) to
conceal and keep it out of reach. An outlet cover may also be used over the adapter.
NOTE: Remember that the standard installation is to position the appliance right over the power
source, storing the power-supply block and the power cord in the recess in the back of the appliance.
To make this easy, do not untie the power cord and take just enough wire to make the connection.
Plug Location
14
AirQ 380/580 Installation